iEi Integration Corp. POC-17i, User Manual

Page: 77 / 129

POC-17i/19i Series
Page 63
5.3.6.1.4 Parallel Port Configuration

Parallel Port [Enabled]
Use the
Parallel Port
option to enable or disable the parallel port.

Disabled
Disable the parallel port

Enabled D
EFAULT
Enable the parallel port

Change Settings [Auto]
Use the
Change Settings
option to change the parallel port IO port address and interrupt
address.

Auto D
EFAULT
The parallel port IO port address and interrupt
address are automatically detected.

IO=378h;
IRQ=7
Parallel Port I/O port address is 378h and the
interrupt address is IRQ7

IO=278h;
IRQ=7
Parallel Port I/O port address is 278h and the
interrupt address is IRQ7

IO=3BCh;
IRQ=7
Parallel Port I/O port address is 3BCh and the
interrupt address is IRQ7

IO=378h
Parallel Port I/O port address is 378h

IO=278h
Parallel Port I/O port address is 278h

IO=3BCh
Parallel Port I/O port address is 3BCh

Device Mode [Printer Mode]
Use the
Device Mode
option to select the mode the parallel port operates in.
Configuration options are listed below.
 Standard and Bi-direction (SPP) mode
Default

EPP-1.9 and SPP Mode

ECP Mode

ECP and EPP 1.9 Mode