June 2018
Translation of the original instructions
Declaration of incorporation
MAN_EN_1057398_Module115-42(B)_R3b.doc
Module 115/42 (B)
Page 47 of 47
8 Declaration of incorporation
EC declaration of incorporation in the sense of the EC directive 2006/42/EC (machinery),
Annex II B
The manufacturer:
IEF-Werner GmbH
Wendelhofstraße 6
78120 Furtwangen - Germany
hereby declares that the following products (the incomplete machine/partial machine):
Designation
IEF-Werner parts group number
Module 115/42
TG1000901
Modul 115/42 B
1305569
where possible based on the scope of delivery, corresponds to the following basic
requirements of the directive on
Machinery (2006/42/EC)
:
Annex I, item:
1.1.2
;
1.1.3
;
1.1.5
;
1.3.2
;
1.3.4
;
1.5.1
;
1.7.3
.
The incomplete machine also corresponds to the following further directives:
Directive
2014/30/EU
of the European Parliament and of the Council of 26 February 2014 on
the harmonisation of the laws of the Member States relating to electromagnetic compatibility.
Directive
2014/35/EU
of the European Parliament and of the Council of 26 February 2014 on
the harmonisation of the laws of the Member States relating to the making available on the
market of electrical equipment designed for use within certain voltage limits.
The technical documents were generated according to Annex VII part B and may be
electronically submitted to the national authorities upon justified request.
List of some applied harmonised standards:
EN ISO 12100-1,-2 / EN ISO 13857 / EN ISO 13850 / EN 60201-1
Commissioning of the incomplete machine delivered by us is not permitted until it has been
determined that the overall system into which the incomplete machine is installed meets the
basic safety and health protection requirements according to Annex I of the above EC
directive 2006/42/EC.
Name of the documentation officer: Frank Reichelt, technical editor
Address of the documentation officer: see manufacturer's address
Furtwangen, January 08, 2018
Manfred Bär (manager)
