Cabinet Heater G*Y/D*Y Series
INSTALLATION, OPERATION, & MAINTENANCE MANUAL
31
SECTION FOUR – Normal Operation and Maintenance, Cont'd.
Replacement Parts
Factory replacement parts should be used wherever
possible to maintain unit performance, it’s normal
operating characteristics, and the testing agency listings.
Replacement parts may be purchased through a local
Sales Representative.
Contact the local Sales Representative or the factory
before attempting any unit modifications. Any
modifications not authorized by the factory could result
in personnel injury, damage to the unit, and could void all
factory warranties.
When ordering parts, the following information must be
supplied to ensure proper part identification:
(1) Complete unit model number
(2) Unit serial number
(3) Complete part description, including any numbers
For warranty parts inquiries, in addition to the information
previously listed, a description of the issue with the parts is
required. Contact the factory for authorization to return any
parts, such as defective parts, to be replaced in warranty.
All shipments returned to the factory must be marked with
a
Return Authorization Number
which is provided by the
factory, if warranty has been approved.
On warranty replacements, in addition to the information
previously listed, the unit shipping code which appears on
the upper right-hand corner of the serial plate is required.
Contact the factory for authorization to return any parts
such as defective parts replaced in warranty. All shipments
returned to the factory must be marked with a Return
Authorization Number which is provided by the factory.
