IP CAMERA
User Manual
IV-BU28122MP
（
IR Bullet
）
M Series V1.1
PRECAUTIONS
Do not use the camera in extreme temperature condit
ions.
Please use the camera within -10
℃
to 50
℃
Air vent is required at high temperature
Do not use or store the camera in humid environment
It may cause poor image quality.
Do not use the camera in unstable lighting conditions.
Inconsistent lighting or flickering may cause poor ima
ge.
Never use the camera close to gas or oil leak.
It may not operate properly.
Do not disassemble the camera.
There is no user serviceable part inside.
Do not drop the camera or apply force on it.
It may cause a malfunction.
Never face the camera to strong light for long periods
of time.
It may damage the CMOS sensor.
Do not expose the camera to rain or any types of liqui
d
If wet, wipe the moisture out immediately.
Liquids can contain minerals that corrode the electroni
c components.
1.OPEN-CASE INSPECTION
1.1 Check step
When a user receives a IP camera,Please check the
equipment appearance without obvious damage.Product
packaging use protective material to deal with most accidental
impact in the transport process.
Please open the product outer packing,Check attachment
provided product is complete,See List 1 below accessories
package for inspection.
1.2 Standard accessories
Please make sure the item is consistent with the listing
when open the product outer packing,Detailed list please see
the table below,Actual configuration, please refer to specific
products.
List 1 Accessories list
Name
Units
Quantity
IP camera
pcs
1
User Manual
pcs
1
Accessory pack
pcs
1
CD
pcs
1
2.PRODUCT STRUCTURE
2.1 Cable function
Picture 1 Cable function
List 2 Cable function of table
2.2 Dimensions
Picture 2 Dimensions
3.EQUIPMENT INSTALLATION
Picture 3 Equipment installation diagram
（
1
）
NO.
Name
1
IP Camera
2
Mounting Screw
3
Expansion bolt
4
Wall or Ceiling
Description:
bracket installation metope, need to withstand at
least 3X the total weight of the bracket and the camera
3.1 Put stickers to the surface where need to be installed
（
Wall
or Ceiling
）；
3.2 Carried out in accordance with the installation sticker
above marked the location of the hole;
When this camera is installed near wireless co
mmunication devices that emits strong electro
magnetic field, irregularity such as noise may
appear in the image.
NO.
Name
Functional description
1
LAN
Connect to a router or switch on
your network using RJ45 Ethernet
cable (Cat5e or better). 100Mhz
connection. PoE supported (class 3
PoE switch required).
2
USB
Connect the WIFI or 3G equipment
3
Power
DC12V power input
4
Alarm
Two way alarm output
5
RS458
Connect to a RS485 cable.
6
/
/
7
Audio
2-way audio input output.
○
2
○
3
Error!
○
5
○
6
○
7
○
1
