IDTECK Star iCON100SR, User Manual

Page: 79 / 90

p.73 Default Output Settings for Input / Output Relations
2 Default Output Settings for Input / Output Relations
Relay#1 Relay#2 TTL#1 TTL#2 BUZZER
[1] Input #1(EXIT BUTTON)
03 00 00 00 00
[2] Input #2(Door Contact SW)
00 99 00 00 00
[3] Input #3
00 00 00 00 00
[4] Input #4
00 00 00 00 00
[5] Input #5(TAMPER S/W)
00 00 00 00 00
[6] Reader#1 ID OK
03 00 00 00 00
[7] Reader#1 ID Error
00 03 00 00 00
[8] Reader#1 ID T/S Error
00 03 00 00 00
[9] Reader#1 APB Error
00 03 00 00 00
[10] Reader#2 ID OK
03 00 00 00 00
[11] Reader#2 ID Error
00 03 00 00 00
[12] Reader#2 ID T/S Error
00 03 00 00 00
[13] Reader#2 APB Error
00 03 00 00 00
[14] DURESS MODE
03 00 00 00 00
[15] OUTPUT TIME SCHEDULE
00 00 00 00 00
[16] INPUT TIME SCHEDULE Input #1 Input #2 Input #3 Input #4 Input #5
00 00 00 00 00
[17] DR OPEN ALARM Relay#1 Relay#2 TTL#1 TTL#2 BUZZER
00 03 00 00 00
[18] CUT OFF ALARM Input #1 Input #2 Input #3 Input #4 Input #5
00 00 00 00 00
[19] INPUT EVENT
01 01 01 01 01
[20] EMERGENCY IN
00 00 00 00 00
[21] CUT OFF CHECK
00 00 00 00 00
* Index No. [1] - [14], [17]-[18]
The values indicate the operating time of each output for the input signal.
99 denote “Operating time is not limited”.