IDTECK Star iCON100SR, User Manual

Page: 73 / 90

p.67 Setup Menu F4
4.3 Output Test
Output Test allows you to test the output ports of the iCON100. To begin the test, press <E
NT>.
First, output ports1 and 2 will be tested. During the test, relay outputs are activated and you
will hear Tick-Tack sounds with the green LED blinking twice. Second, output oorts3 and 4
will be tested. During the test, TTL outputs are activated and the yellow LED blinks twice. Yo
u can check the voltage level of the TTL outputs with appropriate test equipment. Lastly, out
put port 5 will be tested. During the test, you will hear 2 beeps. After all the tests are over, p
ress any key to exit.