IDTECK Star iCON100, User Manual

Page: 61 / 90

p.55 Setup Menu F2
If you choose “Disable”, you cannot gain access via password input when using RF
+PW mode.
To enable or disable PIN Input, press <ENT> and press <4> or <6> to select “ENABLE” or “DIS
ABLE”, and then press <ENT> again to confirm.
2.9 Event Full Alarm
Event Alarm allows you to decide whether to enable or disable the event memory full alarm.
If you enable Event Alarm, the iCON100 beeps with an alarm message when the event mem
ory becomes more than 90% full.
To enable or disable Event Alarm, press <ENT> and press <4> or <6> to select “ENABLE” or “D
ISABLE”, and then press <ENT> again to confirm.
If the event memory becomes full, the oldest event data is overwritten and lost.
2.10 Duress Mode