IDTECK Star Finger007, Manual, Page: 40 / 103

Communication p.33
2 RS-422 Communication Port Connection
2.1 RS-422 Connection (Standalone)
An RS422/RS232 converter is required to use RS422 communication between the FINGER00
7 and the PC.
An INC400 converter is recommended for stable communication when the distanc
e between the converter and the device is too far.
Please follow the instructions below;
●
Connect RS422-TX (+) (Gray wire) of FINGER007 to RS422-RX (+) port of converter.
●
Connect RS422-TX (-) (Yellow wire) of FINGER007 to RS422-RX (-) port of converter.
●
Connect RS422-RX (+) (Brown wire) of FINGER007 to RS422-TX (+) port of converter.
●
Connect RS422-RX (-) (Blue wire) of FINGER007 to RS422-TX (-) port of converter.
●
Plug in the RS232 9PIN connector of the converter to the COM1 or COM2 port of the P
C.
●
Install and run FINGER007 Application Software.