Troubleshooting
p.58
Solution
Check if any buzzer goes off when the keypad is pressed.
☞ If the buzzer goes off:
1.
Enter the master card (or PIN: 4 to 6digit (mode 03 or 05) + ENT).
2.
Enter “73 + ENT” to “Enable Keypad Input To Enter ID Number”.
☞ If the buzzer does not go off:
1.
After going on definite time, buzzer makes a sound again.
I.
If entering unregistered ID 5 times continuously, entering a keypad is interrupted f
or 1 min.
II.
“Set Number of Times of Try-Out” is below.
Enter the master card (or PIN: 4 to 6digit (mode 03 or 05) + ENT).
Enter “82 + ENT” to “Set Number of Times of Try-Out”.
Enter “2 digits of Try-Out Times + ENT”.
e.g. 10 + ENT (10 → Set number of try-out times when unregistered ID)
III.
“Change Keypad Lock-out Time When Try-Out Error Detected” is below.
Enter the master card (or PIN: 4 to 6digit (mode 03 or 05) + ENT).
Enter “60 + ENT” to “Change”.
Enter “2 digits of Try-Out Times + ENT”.
e.g. 10 + ENT (10 → Interrupt entering a keypad for 10 min.)
2.
Although it goes on definite time, buzzer doesn’t go off continuously.
Initialize the product.
If the problem still persists, contact our customer service center.
6
[External Device]
6.1
Problem
An exit button doesn’t work.
Cause
●
An error in connection between the exit button and the 100R
Summary of Contents for Star 100R
