4
2. General
The
IDTECK SR10RW
Smart Card Reader / Writer
can be compatible with
Philips Mifare™ Card
.
The unit provides integrated operation of reader and writer and is designed by which can install easily to
door frame or wall.
The
IDTECK SR10RW
is elegant looking and built in an attractive 10cm (4") read range smart card reader.
It also reads serial numbers from
Philips Mifare™ Cards
compatible, and can read and write special data
of memory field internal card when operating of the unit is set by PRG2000RW.
The
IDTECK SR10RW
can support communication between PRG2000RW, PC and third party controller
using methods of RS232 and RS485.
Three LED indicators of red and green, inside Piezo buzzer sound will guarantee you accurate and reliable
system operations.
3. Features
- 13.56MHz [MIFARE] Contactless smart Card Reader / Writer
- Read Range: Up to 4 inch (10cm)
- Read the Card which is issued by PRG2000RW (Smart Card Read / Write Programmer)
- RS232 / RS485 (default), 26 / 34bit Wiegand (selectable) Output Format
- 3 Array LED Indicators (Red and Green) and Buzzer
- External LED Control
- External Buzzer Control
- Easy to install on Mullion Mounting
- Solid Epoxy Potted
- Waterproof / IP65 / IP66
- Reverse Polarity Protection
- Compatible Software: Smart Card Read / Write Software
- Compatible Controller:
(26bit Wiegand) iCON100, iTDC, iMDC, Third Party Controller
(34bit Wiegand) iCON100SR, iTDC-SR, iMDC, Third Party Controller