Troubleshooting
p.47
4
The device dose not communicate with PC.
4.1
Please check wiring.
See
[Communication]
of the manual and check if the wiring is good.
In the case of RS232 communication
See
[Communication] > [RS232 Communication Port Connection]
of the manual and check i
f the wiring is good.
In the case of RS485 communication
See
[Communication] > [RS485 Communication Port Connection]
of the manual and check i
f the wiring is good.
4.2
Please check if the communication ID is good.
Check communication address setting of software and the device.
1.
Check if communication ID set in the device is same with communication ID set in a soft
ware.
See
[Setting Changes] > [COMMUNICATION ID SETTING]
and check a communication a
Summary of Contents for LX006
