ZMOD4410 Evaluation Kit User Manual
© 2019 Integrated Device Technology, Inc.
11
April 3, 2019
Figure 6. “Analysis” Tab for Measurement Mode “Odor”
The available user options are described in Table 2 for all measurement modes.
The “Analysis” tab can be used to see the active measurement data and to load previously acquired measurement result files by using the “load
data file” button. For this usage, it is not necessary to connect the ZMOD4410 Evaluation Kit hardware. The “Analysis” tab supports data files
with data from multiple sensors if the loaded CSV file has the required format. One sensor will be processed and displayed at a time.
For Standard Operation and Low Power Operation, the default algorithms applied in the “Analysis” tab calculate gas concentrations for eCO
2
and IAQ. Other algorithm results – e.g., calculations of concentrations of ethanol and total volatile organic compounds (TVOC) – are available
upon request.
The algorithm results will be displayed as a colored bar in the “Algorithm Result” section above the graphs (see Table 2) and in the “Algorithm
Result” plots. The first 15 measurements after the start of a measurement are taken for initialization process. To export the data from the
“Analysis” tab into a separate measurement file (CSV), click the “export data” button. Note that only the data shown in the recent plots will be
exported.