The displays:
•
Inputs
: The Input to the
DBP 7+4
used by the active preset is displayed
permanently.
•
Stereo encoder mode:
The mode of encoding, modifiable in the "
St.
Generator
" window is displayed here for the active preset.
•
PC --> DBP 7+4
: This label appears when "
Link PC time to DBP 7+4
time
" is active. This command can be found in the "
Update DBP clock
"
window accessible from the "
Set Up
" menu.
•
Scheduler
: This label indicates that the Scheduler is active.
•
Bypass
: This label is displayed when part of the DBP
7+4
is in by-pass. If
several parts are in by-pass the corresponding labels will be displayed: "
AGC
Bypass
", "
Proc. Bypass
", "
Opti. Bypass
", "
Limit. Bypass
" and "
All
Bypass
".
•
Standby
: When the
DBP 7+4
is in standby. The setting of the standby
threshold is accessible from the Key Tools window.
•
Overload
: If the input is overloaded there can be distortion so this label
appears.
NB : A double-click on the display gives you access to the corresponding window.
6. The « Key Tools » Window
If you have a screen and graphic card which allows a resolution of
1024 x 768
,
you can access the "
Key Tools
" window. It appears below the state bar and lets
you access the following settings;
•
StandBy Threshold
: Minimal level below which the DBP 7+4 will go into
standby.
•
HP Filter
: High Pass Filter
•
Stereo Link
: Function to link the 2 audio channels.
•
Fidelity
: respects the original sound signal even after processing.
•
Process order :
Here you can choose the order of your processing;
expanding the dynamics before processing or processing before expanding.
56