Integrated Device Technology
Quick start ADC1410S, ADC1210S, ADC1010S series
Quick start
© IDT 2012. All rights reserved.
Quick start
Rev. 06
— 2 July 2012
13 of 27
3.2 ADC Software tool
Run the application “SW_ADC_1_r02.exe”. This application will allow:
the user to control features on our high speed ADC through the SPI interface
available on any ADC1410S, ADC1210S and ADC1010S series;
As well as performing any online data acquisition to evaluate the performances of
the ADC1410S, ADC1210S and ADC1010S series.
At start-up, the program will detect any board connected to your system and display
information as can be seen on following window:
Fig 7. SW_ADC_1_r02: start-up screen
: “IDT Banner Button” will display your default internet browser to the IDT data
converter home page;
: “REFRESH” allows you to poll your system for any hardware change. It will reset any
board connected to your system;
: “QUIT” allows you quit the application;
: “INITIALIZATION” allow you to initialize the HSDC-EXTMOD board prior to any
acquisition task.
In the example above, the HSDC-EXTMOD has been detected, as well as
ADC1010S125.
At this moment, make sure that 4 LEDs are visible on the HSDC-EXTMOD (2 close to
power plug, 1 for USB and 1 close to FPGA).
The “Info” page gives more details on the current hardware configuration for the HSDC-
EXTMOD board:
