IDS uEye HE User Manual Download Page 15

Page: 15 / 226

3 General

3.2

USB uEye SE Driver Compatibility

From driver version 3.10 on, only cameras with USB board revision 2.0 or higher are
supported.

Only the following CMOS camera models of the

USB uEye SE

series are affected:

UI-121x

UI-141x

UI-144x

UI-154x

UI-145x

UI-146x

You can use the

USB Hardware Check

(see Software Installation) before installing the driver version

3.10 to check whether your camera is supported. In addition, the

uEye Camera Manager

version 3.10

or above provides information about the compatibility (see Camera Manager ). An incompatible
camera will be displayed as

free

and

not available

The LED(s) on the back of the camera housing also indicate the USB board version:

Figure 7: USB revision 1.2

(green LED)

Figure 8: USB revision 2.0

(red/green LED)

Note on the uEye memory board

The optional memory board of the

USB

uEye

and

USB

uEye

camera series has

been discontinued.

From version 3.30, the functions required to operate the memory board will no longer be
supported in the

uEye

driver.

The

uEye

driver version 3.24 that still supports these functions will continue to be available

in the download area of our website at http://www.ids-imaging.com.

Summary of Contents for uEye HE



































































































































































































































Search results

Summary of Contents for uEye HE

Reviews:

IDS uEye HE, User Manual, Page: 15 / 226

Search results

Summary of Contents for uEye HE

Reviews: