2023-10-25
13
IDS NXT malibu: Technical Manual
8-pin RJ45 socket
Pin
Designation 100BASE-TX
Designation 1000BASE-T
Fig. 1: RJ45
socket,
cam era rear
view
1
Tx+
Bl_DA+
2
Tx-
Bl_DA-
3
Rx+
Bl_DB+
4
Bl_DC+
5
Bl_DC-
6
Rx-
Bl_DB-
7
Bl_DD+
8
Bl_DD-
4.4.2 Pin assignment I/O connector
NOTICE!
The General Purpose I/Os are not potential-free and have no protective circuit.
Faulty wiring (overvoltage, undervoltage) can result in a damage in the electronics.
8-pin Hirose connector (HR25-7TR-8PA(73))
Pin
Signal
Description
Fig. 2: I/O
connector, view
on the cam era
1
VBUS GND
Reference level (ground) for power supply
2
Opto OUT (1)
Flash output with optocoupler (-)
3
GPIO 1
General Purpose I/O (GPIO) 1
4
Opto IN (0)
Trigger input with optocoupler (-)
5
Opto OUT (1)
Flash output with optocoupler (+)
6
GPIO 2
General Purpose I/O (GPIO) 2
7
Opto IN (0)
Trigger input with optocoupler (+)
8
VBUS
Supply voltage: 12-24 V DC
The color assignment of the used I/O cable is specified in the data sheet of the cable. For I/O cables from IDS
Imaging Development Systems GmbH, you can find the data sheet on the website. Select the specific I/O
cable in the
and view the associated data sheet.
The maximum length of the I/O cable is 30 m. The cable must be shielded.
