92
Worn-out printer.
Please contact the local supplier.
6.7. Magnetic stripe encoding
6.7.1. Magnetic encoding error.
First of all, Please press left LED button to retry.
The magnetic head is contaminated with the dust and dirt.
Clean the magnetic head with the cleaning kit.
The magnetic encoding data is not transmitted or the wrong data is
transmitted.
Check the setting of the program and the driver and the magnetic encoding data you
transmitted.
The card is not magnetic card, or inserting direction is wrong.
Change the card or the direction.
Bad magnetic stripes on the card.
Change the card.
6.8. General operation
6.8.1. Ribbon snapped during printing.
Open the top cover and take out the cartridge. After putting the snapped pieces on
together, install the cartridge again. Check the followings if this kind of problem occur
frequently
.
Non-standard cards or bad cards.
Change the cards. You can use only ISO CR-80 card (54mm x 86mm).
Too high or low setting of the color density.
Please contact the local supplier. The color density default of your printer needs to
be changed.
6.8.2. LCD d
isplay “Ribbon Not Found”
Press the left LED button to retry. If it occurs frequently, check the followings
.
