Installing expansion cards
BeOS-Series User’s Handbook
24
Installing and Upgrading BeOS-Series Hardware
Installing expansion cards
Turn off the primary system power switch on the back of the
computer before installing or removing any device.
Observe static electricity precautions. See the warnings on
page 21.
1.
Remove the chassis cover as described in “Removing the chassis
cover” on page 22.
2.
Select an empty expansion slot.
3.
Remove the retaining bracket on the back of the computer:
Caution
Remove the two screws from
the retaining bracket, then pull
the bracket out and off the
computer.
retaining
bracket
Summary of Contents for BeOS Series
Page 1: ......
Page 20: ...BeOS Series User s Handbook 20...
Page 30: ...BeOS Series User s Handbook 30...
