VAC-2000UHD / 4000UHD User’s Guide
33
8.3.3 [ C20 to C2n ] Setting forced HDMI output mode
You can set how to check sink device EDID.
The VAC finds whether the sink device supports HDMI or DVI according to EDID acquired from the sink
device and output appropriate video signals. However, if EDID cannot be acquired for some reason, the sink
device type cannot be determined. In such a case, audio may not be output.
To prevent or solve the problem,
you can output the desired signals by setting this menu.
Menu numbers
C20 to C21: OUT1 to OUT2 (VAC-2000UHD)
C20 to C23: OUT1 to OUT4 (VAC-4000UHD)
Setting values
oFF : Determines the sink device is DVI when EDID cannot be read [Default]
Er1 : Determines the sink device is HDMI (without SCDC) when EDID cannot be read
AL1 : Always determines the sink device is HDMI (without SCDC)
Er2 : Determines the sink device is HDMI (with SCDC) when EDID cannot be read
AL2 : Always determines the sink device is HDMI (with SCDC)
Notes:
● If you want to use this menu other than default setting, set “8.2.2 [ F10 ] Setting EDID resolution” to a value
other than “01” (EXTERNAL) and set the resolution supported by the sink device.
● This menu is enabled when HDMI signals are input and the output mode is set to the value other than
“DVI”.
8.3.4 [ C30 to C3n ] Setting output mode
