SWC-2000 User
’s Guide
87
9.13.4 COM SETTING
Set the RS-232C communication.
Select “RECEIVER” or “TRANSMITTER” for “FUNCTION”.
-
“RECEIVER”: The SWC-2000 is controlled externally.
-
“TRANSMITTER”: The SWC-2000 controls external devices. Set the information of external device as
shown below.
When you finish setting, click the “SEND” button.
[Table 9.16] RS-232C communication setting
Setting item
Setting value
Default
[FUNCTION]
Operation mode
RECEIVER,TRANSMITTER
RECEIVER
[BAUDRATE(bps)]
4800, 9600, 19200, 38400
9600
[DATA BITS] (bit)
8, 7
8
[PARITY CHECK]
NONE, EVEN, ODD
NONE
[STOP BITS] (bit)
1, 2
1
9.13.5 RELOAD button
Reloads the displayed WEB menu and displays it on the WEB browser.
Click the “RELOAD” button.
9.13.6 SEND button
Applies settings of LAN / COM menu.
Click the “SEND” button.
