OPF-TH1000-A/OPF-RH1000-A User’s Guide
19
5.8 Reference: Attaching cable clamp
HDMI cables and connectors do not normally have a lock mechanism. Use the supplied cable clamp to apply
the HDMI cable to the OPF-H1000.
1
Pull up the part pointed by the short arrow and separate the bar and ring parts.
2
Pass the HDMI cable through the ring.
3
Insert the bar to the OPF-H1000 as shown below.
4
Attach the HDMI cable to the bar using the ring and insert the HDMI cable to the OPF-H1000.
To remove the HDMI cable, perform step 1 again to separate the ring and cable.
Concave-convex surface
