![IDK NJR-T01UHD Command Reference Manual Download Page 42](http://html1.mh-extra.com/html/idk/njr-t01uhd/njr-t01uhd_command-reference-manual_3747300042.webp)
NJR-T01UHD/NJR-R01UHD Command Guide
42
@GES
Monitor’s EDID (Cont’d)
Parameter
*4 For audio support, sampling frequency, bit length, the number of channels, and
compressed audio
AUDIO NOT
SUPPORT
A sink device that does not support audio signal is
connected.
LINEAR PCM-
32/44.1/48kHz-16/20
/24BIT-8CHANNEL
A sink device supporting audio signal is connected.
Supported sampling frequency (32, 44.1, 48, 88.2, 96,
176.4, 192), the number of bits (16, 20, 24), the number
of channels (1 to 8), and compressed audio support
status are returned.
Example
@GES,2,1,1,0
@GES,2,1,1,0,MSD-702,
1920x1080 148.50MHz,DVI,AUDIO
NOT SUPPORT
Getting the EDID of the sink device
connected to NJR-R01UHD Channel 1
- Monitor name : MSD-702
- Resolution : 1920x1080
- Dot clock : 148.50 MHz
- HDMI : Not supported
- Audio : Not supported
Remarks
-
@GIV
Version
Function
Getting
Format
@GIV, device, ch, reserved
Return value
@GIV, device, ch, reserved, id, ver
Parameter
device: Model
1 = NJR-T01UHD, 2 = NJR-R01UHD
ch: Channel
1 to 512 = Input channel 1 to Input channel 512
If a command is input from the RS-232C connector of NJR-01UHD or from the
IP-NINJAR Configurator, “1” is set (fixed).
reserved: Reservation
“1” fixed
id : Model number
ver : Firmware version
Example
@GIV,1,1,1
@GIV,1,1,1,NJR-T01UHD,1.00
Getting the product information of
NJR-T01UHD Channel 1
- Model : NJR-T01UHD
- Firmware version : 1.00
Remarks
-