NJR-T01UHD/NJR-R01UHD Command Guide
32
@GAF / @SAF
Audio format (Cont’d)
Example
@GAF,1,1,1
@GAF,1,1,1,0,7
Getting the audio format that can be output to
Channel 1
Up to PCM 192 kHz
@SAF,1,1,1,4,3
@SAF,1,1,1,4,3
Setting Channel 1 to output audio up to PCM and
DTS 48 kHz
(The maximum PCM sampling frequency is not
changed.)
Completed
Remarks
The NJR-R01UHD does not support this command.
@GSP / @SSP
Speaker configuration
Function
Getting
Setting
Format
@GSP, device, ch, port
@SSP, device, ch, port, number (,
speaker_1, speaker_2
･･･
)
Return value
@GSP, device, ch, port, number,
speaker_1 (, speaker_2
･･･
)
@SSP, device, ch, port, number (,
speaker_1, speaker_2
･･･
)
Parameter
device: Model
“1” fixed
ch: Input channel
1 to 512 = Input channel 1 to Input channel 512
If a command is input from the RS-232C connector of NJR-T01UHD or from the
IP-NINJAR Configurator, “1” is set (fixed).
port: Input connector
“1” fixed
number: The number of speakers
1 to 8 [Default] 2
speaker_1 to speaker_8: Speakers to be used
0 = Front Left/Right [Default], 1 = Low Frequency Effect,
2 = Front Center,
3 = Rear Left/Right,
4 = Rear Center,
5 = Front Left/Right Center,
6 = Rear Left/Right Center, 7 = Front Left/Right Wide,
8 = Front Left/Right High,
9 = Top Center,
10 = Front Center High
