NJR-T01SDI Command Guide
21
4.5.2.2 Audio
@GAM / @SAM
Digital audio output mute
Command group
Group A
Function
Getting
Setting
Format
@GAM, device, ch, port
@SAM, device, ch, port, mute
Return value
@GAM, device, ch, port, mute
@SAM, device, ch, port, mute
Parameter
device: Model
“1” (fixed).
ch: Channel
1 to 512 = Channel 1 to Channel 512
If a command is input from the RS-232C connector of NJR-T01SDI or from IP-NINJAR
Configurator through LAN, the value is “1” (fixed).
port: Connector
“1” (fixed).
mute: Audio mute
0 = Mute OFF [Default], 1 = Mute ON
Example
@GAM,1,1,1
@GAM,1,1,1,0
Getting the audio mute of channel 1.
Mute OFF.
@SAM,1,1,1,0
@SAM,1,1,1,0
Setting the audio mute of channel 1 to OFF.
Completed normally.
Remarks
If setting from the RS-232C connector of the NJR-T01SDI, set the DIP switch to
Group A.
