NJR-T04HD / NJR-R04HD User’s Guide
49
10.2.5 Display position
You can set the position where input video is displayed.
Setting for
NJR-T04HD: For each HDMI input connector, each input signal
10.11.1 Devices to be connected
” is set to “NJR-T01UHD or NJR-R01UHD is included”
or “
“ is set to “All Inputs”, @SNP communication command cannot be
used.
NJR-R04HD: For each HDMI output connector
Settings for when videowall is enabled and for when videowall is disabled can be kept
individually.
【
See: 10.2.12 Videowall enabled / disabled and coordinate grid
Setting value
Horizontal display position
[Table 10.8] Horizontal display position
Model
Set value
Default
NJR-T04HD All Inputs
－
Horizontal display size to
＋
1920
0
Input video of IN1 to IN4
－
Horizontal display size to
＋
Horizontal input resolution
0
NJR-R04HD
－
－
Horizontal display size to
＋
Horizontal output resolution
0
Vertical display position
[Table 10.9] Vertical display position
Model
Set value
Default
NJR-T04HD All Inputs
－
Vertical display size to
＋
1080
0
Input video of IN1 to IN4
－
Vertical display size to
＋
Vertical
input resolution
0
NJR-R04HD
－
－
Vertical display size to
＋
Vertical
output resolution
0
Communication command
@SNP Setting display position
@GNP Getting display position
@SPS Setting relative movement of display position
NJR-T04HD / NJR-R04HD
