NJR-T04HD / NJR-R04HD User’s Guide
46
10.2.2 Aspect ratio for sink device
You can set the aspect ratio of the connected sink device.
If you select “RESOLUTION,” the aspect ratio of the resolution selected in “Output resolution” will be applied.
If aspect ratio of the target sink device and the ratio set in “Output resolution“ are different from each other,
you can select an aspect ratio for the sink device of: 4:3, 5:4, 5:3, 16:9, 16:10
【
Setting for
For each HDMI output connector
For outputs whose “
10.2.12 Videowall enabled / disabled and coordinate grid
” is set to “Enabled”, the
setting of OUT1 will be applied.
The aspect ratio can be set for each output separately in the following cases. However, the same setting
is applied for all outputs. If reduction ratio is not the same, the smallest reduction ratio will be applied.
・
An NJR-T01UHD is used as a transmitter and 4K video is input.
・
An NJR-T04HD is used as a transmitter and “
10.11.1 Devices to be connected
“ is set to
“NJR-T01UHD or NJR-R01UHD is included” and “
” is set to IN1 to IN4.
Setting value
RESOLUTION [Default]
4:3
5:4
5:3
16:9
16:10
Communication command
@SUM Setting aspect ratio for sink device
@GUM Getting aspect ratio for sink device
NJR-R04HD
