MSD-804FD
User’s Guide
91
7.6.3
Horizontal display period [H DISPLAY]
･
Horizontal display period: 64 to 2900 (Equal or less than [The total number of horizontal dots - 64])
[Default]: Depends on input signals
[Fig. 7.21] Horizontal display period
The settable range depends on setting of “
7.6.1 The total number of horizontal dots [H TOTAL DOTS]
”.
The set value is [Total number of horizontal dots >Horizontal displaying period].
1. To set the horizontal display period using menu:
MSD-804FD
Top
↓ SET key
[FUNCTION SELECT]
INPUT TIMING
keys
: Select “INPUT TIMING”.
↓ SET key
[INPUT TIMING]
H DISPLAY
keys
: Select “H DISPLAY”.
↓ SET key
[IN1 H DISPLAY]
102
4
DOT
▲▼
keys: Set the horizontal display period.
◄►keys: Select the desired input (IN1 to IN8).
↓ ESC key: Returns to the previous screen
Note:
You can set the horizontal display period only if there is an input signal. If no signal
is input, you cannot set the period, and the message shown right is displayed.
2. To set the horizontal display period using commands:
@SHD: Set horizontal display period
@GHD: Get horizontal display period
[IN1 H DISPLAY]
NOT AVAILABLE NOW
Horizontal
synchronizing signal
Video signals
Horizontal display period = The number of dots displaying video
Total horizontal dots
For each input port/input signal
