MSD-72 Series User’s Guide
59
9.4.4 HUE
Menu Top
→
IMAGE EFFECT
→
INPUT HUE
Setting for Each input channel, each input signal
Setting value 0
°
to 359
°
[Default]: 0
°
You can set HUE of input signal.
Note:
This menu can be set up to 359
°
, but if the dot clock of input signal exceeds 170 MHz, it is treated as 0
°
. In
this case, “*” is displayed on the VFD screen.
9.4.5 Saturation
Menu Top
→
IMAGE EFFECT
→
INPUT SATURATION
Setting for Each input channel, each input signal
Setting value 0% to 200% [Default]:100%
You can set the saturation of input signal.
Note:
This menu can be set up to 200%, but if the dot clock of input signal exceeds 170 MHz, it is treated as 100%.
In this case, “*” is displayed on the VFD screen.
9.4.6 Black level
Menu Top
→
IMAGE EFFECT
→
INPUT SETUP LEVEL
Setting for Each input channel, each input signal
Setting value -100% to +100% (by 0.5%) [Default]:
±
0.0%
You can adjust the black level of input signal.
9.4.7 Gamma
Menu
Top
→
IMAGE EFFECT
→
OUTPUT GAMMA
Setting for
Each output channel
Setting value
0.1 to 3.0 (0.1 steps) [Default]: 1.0
You can adjust the gamma of output signal.
