IDK MSD-701UHD, Command Reference Manual

Page: 67 / 115

MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
67
3.3.9 EDID
@GED / @SED EDID
Getting Command @GED
Response @GED, edid_1, edid_2, edid_3, edid_4, edid_5, edid_6, edid_7, edid_8
Setting Command @SED, ch_1, edid_1 (, ch_2, edid_2
･･･
)
Response @SED, ch_1, edid_1 (, ch_2, edid_2
･･･
)
Parameter edid_1-8: EDID
0 = Built-in EDID [Default],
1 = OUT1A MONITOR,
2 = OUT1B MONITOR,
3 = OUT2A MONITOR,
4 = OUT2B MONITOR,
101 to 108 = COPY DATA 1 to COPY DATA 8
ch_1-8: Input channel
0 = All digital inputs, 1 = IN1 to 8 = IN8
Getting
example
Command
Response
@GED
@GED,0,0,0,3,0,0,0,0
Description Getting the set EDID.
IN4: EDID of the sink device that is connected to OUT3,
other inputs: built-in EDID
Setting
example
Command
Response
@SED,2,3
@SED,2,3
Description Setting IN2: EDID that is read from the sink device connected to OUT3.
Remarks These commands are only for digital input.
IN6 and IN7: If “0” (Analog signal) is selected for “ @GIN / @SIN Signal selection
of DVI input connector ”, “-1” is acquired and the setting cannot be valid.
In order to use a copied data, read EDID data from the sink device in “ @RME
Copying EDID ” in advance.