IDK MSD-701UHD, Command Reference Manual

Page: 36 / 115

MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
36
@ODC Output default color
Setting Command @ODC, ch_1 (, ch_2)
Response @ODC, ch_1 (, ch_2)
Parameter ch_1-2: Output channel
0 = All outputs, 1 = OUT1, 2 = OUT2
Setting
example
Command
Response
@ODC,1
@ODC,1
Description Initializing OUT1 image quality settings.
@GOB / @SOB Output
brightness
@GOC / @SOC Output
contrast
Remarks
－
3.3.5 Input settings
@GDT / @SDT No-signal-input monitoring
Getting Command @GDT
Response @GDT, time_1, time_2, time_3, time_4, time_5, time_6, time_7,time_8
Setting Command @SDT, ch_1, time_1 (, ch_2, time_2)
Response @SDT, ch_1, time_1 (, ch_2, time_2)
Parameter time_1-8: No-signal-input monitoring
0 = OFF, 2000 = 2 sec to 15000 = 15 sec [Default] 10000 = 10 sec
Set the value by 100 ms. If you set a value other than 0 for the lower 2 digits, these
values will be rounded down.
(For example, if you set it to 2955, the monitoring time is set to 2900 ms.)
ch_1-8: Input channel
0 = All digital inputs, 1 = IN1 to 8 = IN8
Getting
example
Command
Response
@GDT
@GDT,6000,10000,10000,4000,4000,4000,4000,4000
Description Getting the set monitoring time of input video signal.
IN1: 6000 ms. (6 sec.), IN2 and IN3: 10000 ms. (10 sec.),
IN4 and IN8: 4000 ms. (4 sec.)
Setting
example
Command
Response
@SDT,3,6000
@SDT,3,6000
Description Setting the monitoring time of IN3 to 6000 ms. (6 sec.).
Remarks These commands are only for digital input.
IN6 and IN7 are available only if “1” (Digital signal) is selected for “ @GIN / @SIN
Signal selection of DVI input connector ”. If “0” (Analog signal) is selected, “-1” is
returned.