IDK MSD-6203, User Manual

Page: 83 / 180

MSD-62 Series User’s Guide
83
9.8 Setting input timing
You can set the timing parameters for analog signal inputs.
The MSD recalls the optimal table from its built-in library of tables and adjusts the input timing automatically,
you typically will not need to change settings in this menu. However, if signals which are not registered in the
MSD tables are input or if part of the video image is cut off while relying on the standard table registered in the
MSD, you may optimize the input timing parameters manually.
For digital inputs, you typically do not need to manually set timing parameters, but if part of the video image is
cut off, you may make fine adjustments as required.
[Table 9.8] Settable items
Function
Analog input Digital input
Automatic measurement Partly 1 Cannot be set
The total number of horizontal dots Partly 1, Partly 2 Partly 2
Start position Can be set Can be set
Active area Can be set Can be set
Automatic measurement of start
position
Can be set Cannot be set
Automatic setting of input timing Can be set Cannot be set
Loading device data Partly 3 Can be set
Registering device data Partly 1 Cannot be set
Tracking Partly 1 Cannot be set
Partly 1: can be set only if analog RGB / analog YPbPr signals are input.
Partly 2: only displayed if analog video signals are input or for digital input.
Partly 3: can be set only if the device data of input signals are registered in the MSD.