MSD-62 series Command Guide
57
@GEN / @SEN
HDCP output
Getting
Command
@GEN
Response
@GEN, hdcp_1, hdcp_2, hdcp_3,
･･･
, hdcp_8
Setting
Command
@SEN, ch_1, hdcp_1 (, ch_2, hdcp_2
･･･
)
Response
@SEN, ch_1, hdcp_1 (, ch_2, hdcp_2
･･･
)
Parameter
hdcp_1-8: HDCP output
0 = HDCP is encrypted only if input signal is with HDCP,
1 = HDCP is always encrypted. [Default],
2 = HDCP is not encrypted.
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
Getting
example
Command
Response
@GEN
@GEN, 1,1,1,1,1,1,1,0
Description Getting the set HDCP output.
OUT8: HDCP is encrypted only if input signal is with HDCP.
Other output channels: HDCP is always encrypted.
Setting
example
Command
Response
@SEN,1,1
@SEN,1,1
Description Setting OUT1 to “1” (HDCP is always encrypted).
Remarks
－
@GHR / @SHR
The number of HDCP retries
Getting
Command
@GHR
Response
@GHR, retry_1, retry_2, retry_3,
･･･
, retry_8
Setting
Command
@SHR, ch_1, retry_1 (, ch_2, retry_2
･･･
)
Response
@SHR, ch_1, retry_1 (, ch_2, retry_2
･･･
)
Parameter
retry_1-8: The number of retires
-1 = Retry until succeed [Default],
0 = Not retry,
1 to 100 = Retry for the desired number of retries
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
Getting
example
Command
Response
@GHR
@GHR, -1,-1,-1,-1,-1,-1,-1,10
Description Getting the set number of HDCP retires.
OUT8: Retry for up to 10 times.
Other output channels: continue to retry until succeed.
Setting
example
Command
Response
@SHR,4,10
@SHR,4,10
Description Setting OUT4 to retry for up to 10 times.
Remarks
－
