MSD-62 series Command Guide
112
@GFZ / @SFZ
Freeze
Getting
Command
@GFZ
Response
@GFZ, freeze_1, freeze_2, freeze_3,
･･･
, freeze_8
Setting
Command
@SFZ, ch_1, freeze_1 (, ch_2, freeze_2
･･･
)
Response
@SFZ, ch_1, freeze_1 (, ch_2, freeze_2
･･･
)
Parameter
freeze_1-8: Setting freeze
0 = OFF [Default], 1 = ON
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
Getting
example
Command
Response
@GFZ
@GFZ,1,0,0,0,0,0,0,0
Description Getting the freeze status.
OUT1: input image is frozen and output.
Setting
example
Command
Response
@SFZ,1,1
@SFZ,1,1
Description Freezing the OUT1 image.
Remarks
Images freeze temporarily. When input channel is switched or input signal is
changed, the freeze is released automatically and input image is output normally.
@CAP
Capturing input image
Setting
Command
@CAP, ch, bitmap
Response
@CAP, ch, bitmap
Parameter
ch: Output channel
1 = OUT1 to 8 = OUT8
bitmap: Bitmap number
1 = Bitmap 1,
2 = Bitmap 2,
3 = Bitmap 3,
4 = Bitmap 4
Only the number of divides or less value can be specified.
Setting
example
Command
Response
@CAP,1,2
@CAP,1,2
Description Registering OUT1 input video in bitmap 2.
Remarks
－
