MSD-62 series Command Guide
105
@SPM
Saving all settings
Setting
Command
@SPM, preset (, name)
Response
@SPM, preset (, name)
Parameter
preset: Preset memory
1 to 12
name: Memory name
Up to 10 characters using 20 to 7D from ASCII codes.
If you do not specify memory name, only crosspoint settings are saved without
changing the memory name.
Setting
example
Command
Response
@SPM,2
@SPM,2
Description Saving the current settings in preset memory 2 without changing the memory
name.
Setting
example
Command
Response
@SPM,2,MEMORY2
@SPM,2,MEMORY2
Description Saving the current settings in preset memory 2 with the name of “MEMORY2”.
Remarks
－
@SCP
Copying output setting
Setting
Command
@SCP, out_ori, out_des
Response
@SCP, out_ori, out_des
Parameter
out_ori: Source output channel
1 = OUT1 to 8 = OUT8
out_des: Destination output channel
1 = OUT1 to 8 = OUT8
Setting
example
Command
Response
@SCP,2,1
@SCP,2,1
Description Copying OUT2’s setting to OUT1.
Remarks
Once output setting is copied, all settings related to output are copied.
