MSD-501/502/701/702 User
’s Guide
62
7.10.3 Input resolution for AV devices
Menu Top
→
EDID
→
AV RESOLUTION
Setting for Each input (only digital input)
Setting value
・
AUTO [Default]
・
480p
・
1080i
・
UNUSED
・
720p
・
1080p
You can set the resolution requested to be output from AV devices (such as Blu-ray players).
This setting will be valid if
“INTERNAL EDID” is selected for “
”.
Normally, set this menu to
“AUTO” to set resolution for AV devices according to “
automatically.
“UNUSED” disables the EDID for AV devices. If you select “AUTO” and the resolution output from the PC is
different from the
resolution set in Properties, the problem may be solved by selecting “UNUSED”.
If there is a potential to connect both PCs and AV devices with different resolutions (for example, PC with
WXGA (1366x768), Blu-ray disc player with 1080p), set the PC resolution in
”
and select the AV resolution from 480p, 720p, 1080i, and 1080p in this menu. However, some PCs and AV
devices may choose the higher resolution of the resolutions set in
”
” or this menu.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
[Table 7.1]
Input resolutions when “AUTO” is selected
PC resolution
800
x
600
1024
x
768
1280
x
720
1280
x
768
1280
x
800
1280
x
960
1280
x
1024
1360
x
768
1366
x
768
1400
x
1050
1440
x
900
1600
x
900
1600
x
1200
1680
x
1050
1920
x
1080i
1920
x
1080p
1920
x
1200
2048
x
1152
AV resolution
480p
720p
1080i
1080p
Note:
If you select “UNUSED”, the settings of ”
7.10.4 Deep Color
”, “
7.10.5 Audio format
”, and “
7.10.6 Speaker
“ will be disabled and audio is not output because the source device outputs signal through DVI
mode.
