IDK MSD-501, User Manual

Page: 39 / 120

MSD-501/502/701/702 User
’s Guide
39
7.5 Quality setting
Setting items for input channels are for correcting color bias.
Image quality to be output can be set for each input side (input channels) and output side (output channels) as
follows.
Output
signals Input
signals
HUE
SETUP
SATURATION
CONTRAST
Setting for input channels Setting for output channels
SHARPNESS
BRIGHTNESS BRIGHTNESS
CONTRAST
[Fig. 7.6] Video correction
7.5.1 Sharpness
Menu Top
→
IMAGE EFFECT
→
INPUT SHARPNESS
Setting for Each input/input signal
Setting value -5 to +15 [Default]:0
7.5.2 Brightness
Menu Top
→
IMAGE EFFECT
→
INPUT BRIGHTNESS (Input side)
/OUTPUT BRIGHTNESS (Output side)
Setting for Input side : Each input/input signal
Output side : Each output (COMMON TO OUTA AND OUTB)
Setting value 80% to 120% [Default]:100%
7.5.3 Contrast
Menu Top
→
IMAGE EFFECT
→
INPUT CONTRAST (Input side) / OUTPUT CONTRAST (Output side)
Setting for Input side : Each input/input signal
Output side : Each output (COMMON TO OUTA AND OUTB)
Setting value R / G / B : 0% to 200% [Default]:R / G / B: 100%
If you set
“LINK” to ”ON”, only settings of ”R” can be set, and “G” and “B” change relatively.