MSD-501/502/701/702 User
’s Guide
33
7.4 Setting position, size, and masking
Position, size, and masking can be set for input side and output side. Normally, set them for input side. If
edges are cut off due to enlarged display in the sink device side or if enlarging output video for all inputs at
once, set them for the output side.
7.4.1 Output resolution
Menu
Top
→
OUTPUT TIMING
→
RESOLUTION
Setting for
Each output (common to OUTA and OUTB)
Setting value
・
AUTO-A [Default]
・
SXGA+@60
(1400x1050)
・
576p@50
(720x576)
・
AUTO-B
・
WXGA+@60
(1440x900)
・
720p@50
(1280x720)
・
VGA@60
(640x480)
・
WXGA++@60 (1600x900)
・
[email protected] (1280x720)
・
SVGA@60
(800x600)
・
UXGA@60
(1600x1200)
・
720p@60
(1280x720)
・
XGA@60
(1024x768)
・
WSXGA+@60 (1680x1050)
・
1080i@50
(1920x1080)
・
WXGA@60
(1280x768)
・
VESAHD@60
(1920x1080)
・
[email protected] (1920x1080)
・
WXGA@60
(1280x800)
・
WUXGA@60
(1920x1200)
・
1080i@60
(1920x1080)
・
Quad-VGA@60 (1280x960)
・
QWXGA@60
(2048x1152)
・
1080p@50
(1920x1080)
・
SXGA@60
(1280x1024)
・
(720x480)
・
[email protected] (1920x1080)
・
WXGA@60
(1360x768)
・
(720x480)
・
1080p@60
(1920x1080)
・
WXGA@60
(1366x768)
・
576i@50
(720x576)
Normally, the optimal resolution will be selected automatically if you set this menu to
“AUTO-A” or “AUTO-B”.
Numbers following
“@” are vertical synchronous frequency.
480i/480p/576i/576p/720p/1080i/1080p are the timings of CEA-861E standard.
Others are timings meeting VESA DMT standard or VESA CVT standard. VESAHD@60, WUXGA@60, and
QWXGA@60 are output with Reduced Blanking.
■
”AUTO-A” and “AUTO-B”:
“AUTO-A”: selects the optimal resolution depending on the EDID of the connected sink device, and outputs
video signal to the OUTA output connector.
“AUTO-B”: selects the optimal resolution depending on the EDID of the connected sink device, and outputs
video signal to the OUTB output connector.
At this time, the resolution that is actually output is displayed in parentheses. In case EDID cannot be loaded
from the sink device, the resolution that was used in the last time is selected with
“*” on its right side.
[OUT1 RESOLUTION]
A
UTO-A(1080p59.94)
[OUT1 RESOLUTION]
A
UTO-A(1080p59.94)*
[Fig. 7.3] Left: optimal resolution; right: EDID cannot be loaded or the MSD cannot output the optimal
resolution
