MSD-501/502/701/702 User
’s Guide
23
6 Basic operation
6.1 Required time
After the MSD is turned on, it takes 3 seconds to receive communication command and takes 12 seconds or
longer to receive front panel operation.
Operation
Required time
Receiving communication command
3 seconds
Receiving operation of front panel
12 or longer seconds
Note:
If
7.15.7 Bitmap output at startup (P.93)
” is set to “ON”, the required time for front panel operation
may be longer than 12 seconds.
6.2 Selecting input channel
Switching mode of input channel can be selected from the top screen or SWITCHING MODE menu.
If you set it from the top screen, use
“
▲
” and “
▼
“keys to select the desired mode and press the desired input
channel key.
V&A
Video and audio
simultaneously
VIDEO Only video
AUDIO Only audio
OFF
IN 7
IN 6
IN 5
IN 4
IN 3
IN 2
IN 1
DISPLAY
POWER
OUT 1
OUT 2
1
2
OFF
IN 5
IN 4
IN 3
IN 2
IN 1
DISPLAY
POWER
Example MSD-702
Example MSD-501
IN3 input signals will be output to OUT1.
IN5 input signals will be output to OUT2.
IN1 input signals will be output.
[Fig. 6.1] Setting output signal
MSD-702
▲
▼
[ V&A ]
MENU / SET
ESC
Top screen
Channel switching mode
