IDK MSD-402, User Manual

Page: 75 / 120

MSD-402 User’s Guide
75
8.10.3 Input resolution for AV devices
Menu EDID
→
AV RESOLUTION
Setting for Each input channel
Setting value
・
AUTO [Default
・
480p
・
1080i
・
UNUSED
・
720p
・
1080p
You can set the resolution requested to be output from AV devices (such as Blu-ray players).
This setting will be valid if “INTERNAL EDID” is selected for “ 8.10.1 EDID ”.
Normally, set this menu to “AUTO” to set resolution for AV devices according to “ 8.10.2 Resolution for PCs ”
automatically.
“UNUSED” disables the EDID for AV devices. If you select “AUTO” and the resolution output from the PC is
different from the resolution set in Properties, the problem may be solved by selecting “UNUSED”.
If there is a potential to connect both PCs and AV devices with different resolutions (for example, PC with
WXGA (1366x768), Blu-ray disc player with 1080p), set the PC resolution in “ 8.10.2 Resolution for PCs ” and
select the AV resolution in this menu. However, some PCs and AV devices may choose the higher resolution
of the resolutions set in “ 8.10.2 Resolution for PCs” or this menu.
Click the “SET” button to open the dialog box and click the “OK” button to renew the EDID settings.
[Table 8.13] Input resolutions when “AUTO” is selected
PC
Resolution
800
x
600
1024
x
768
1280
x
720
1280
x
768
1280
x
800
1280
x
960
1280
x
1024
1360
x
768
1366
x
768
1400
x
1050
1440
x
900
1600
x
900
1600
x
1200
1680
x
1050
1920
x
1080i
1920
x
1080p
1920
x
1200
2048
x
1152
AV Resolution
480p 720p 1080i 1080p
Note:
If you select “UNUSED”, the settings of “ 8.10.4 Deep Color ”, “ 8.10.5 Audio format ”, and “ 8.10.6 Speaker
configuration ” will be disabled and audio is not output because the source device outputs signal through DVI
mode.