MSD-402 Command Guide
68
@GCM / @ECM
Editing cross point memory
Function
Getting
Setting
Format
@GCM, memory
@ECM, memory, video_o1, audio_o1,
video_o2, audio_o2, video_p1, audio_p1,
video_p2, audio_p2, on_p1, on_p2
Return value
@GCM, memory, video_o1, audio_o1,
video_o2, audio_o2, video_p1, audio_p1,
video_p2, audio_p2, on_p1, on_p2, name
@ECM, memory, video_o1, audio_o1,
video_o2, audio_o2, video_p1, audio_p1,
video_p2, audio_p2, on_p1, on_p2
Parameter
memory: Cross point memory
1 to 9
video_o1-o2: Video input channel of OUT
audio_o1-o2: Audio input channel of OUT
video_p1-p2: Video input channel of PinP
audio_p1-p2: Audio input channel of PinP
-1 = Not control [Default], 0 = OFF, 1 = IN1 to 4 = IN4
on_p1-p2: PinP output
-1 = Not control [Default], 0 = OFF, 1 = ON
name: Memory name
Up to 10 one-byte characters using 20 to 7D from ASCII codes
Example
@GCM,2
@GCM,2,3,3,1,1,0,0,0,0,0,0,PATTERN2
Getting video and audio channel of cross
point memory 2.
With the name of
“PATTERN2”, OUT1:
IN3; OUT2: Not control;
PinP1 and PinP2: OFF;
PinP window output of PinP1 and PinP2:
OFF
@ECM,2,1,1,-1,-1,0,0,0,0,0,0
@ECM,2,1,1,-1,-1,0,0,0,0,0,0
When cross point memory 2 is loaded,
OUT1 is set to IN1 and OUT2 is Not
control. PinP1 and PinP2 are set to OFF;
PinP window output of PinP1 and PinP2 is
set to OFF.
Remarks
Nothing is saved in the memory by factory default, the state is
“-1” (Not control).
If a value that is different from the video input channel is specified to audio input
channel of OUT1 and OUT2, an error is replied.
If a value other than
“OFF” is specified to audio input channel of PinP1 and PinP2, an
error is replied.