IDK MSD-402, Command Reference Manual, Page: 58 / 85

MSD-402 Command Guide
58
3.3.9 EDID Setting
@GED / @SED EDID data
Function Getting Setting
Format @GED @SED, ch_1, edid_1 (, ch_2, edid_2
･･･
)
Return value @GED, edid_1, edid_2, edid_3, edid_4 @SED, ch_1, edid_1 (, ch_2, edid_2
･･･
)
Parameter edid_1-4: EDID data
0 = Built-in EDID [Default], 1 = OUT1 MONITOR,
2 = OUT2 MONITOR, 101 to 108 = COPY DATA 1 to COPY DATA 8
ch_1-4: Input channel
0 = All inputs, 1 = IN1 to 4 = IN4
Example @GED
@GED,0,0,2,0
Getting EDID data.
IN3: EDID of the sink device connected to
OUT2
Other input channels: built-in EDID
@SED,2,2
@SED,2,2
Setting IN2: EDID read from the sink
device connected to OUT2.
Completed normally.
Remarks Those commands are only for digital input.
In order to use a copied data, read EDID data from the sink device in
“
@RME
Copying EDID (P.63)
” in advance.