IDK MSD-402, Command Reference Manual

Page: 69 / 85

MSD-402 Command Guide
69
@RPM / @SPM Loading/saving all settings
Function Setting Saving
Format @RPM, preset @SPM, preset (, name)
Return value @RPM, preset @SPM, preset (, name)
Parameter preset: Preset memory
1 to 8
name: Memory name
Up to 10 one-byte characters using 20 to 7D from ASCII codes.
If you do not specify memory name, only cross point settings are saved without
changing the memory name.
Example @RPM,3
@RPM,3
Loading preset memory 3.
Completed normally.
@SPM,2
@SPM,2
Saving the current settings in preset
memory 2 without changing the memory
name.
Completed normally.
@SPM,2,MEMORY2
@SPM,2,MEMORY2
Saving the current settings in preset
memory 2 with the name of
“MEMORY2”.
Completed normally.
Remarks Note that once preset memory is loaded, all settings of video and audio I/O except for
some environmental settings will be updated.
@SCP Copying output setting
Function Saving
Format @SCP, out_ori, out_des
Return value @SCP, out_ori, out_des
Parameter out_ori: Output channel to be copied
1 = OUT1, 2 = OUT2
out_des: Destination output channel
1 = OUT1, 2 = OUT2
Example @SCP,1,2
@SCP,1,2
Copying output settings of OUT1 to OUT2
Completed normally.
Remarks Note that once output settings are copied, all settings related to the output will be
updated.