IDK ICP-401UHD, User Manual, Page: 25 / 79

ICP-401UHD User Guide
25
7.6 Initialization
All settings will be reset to factory default values by powering on the ICP while pressing the “ESC” key.
Press and hold the “ESC” key until you hear a long beep sound.
Note that after returning to factory default, the previous setting values cannot be restored.
[Table 7.1] Factory default
[1/4]
Menu Factory default See
INPUT SETTING
INPUT SIGNAL CHECK For Each input channel P.35
Default 10Sec
INPUT HDCP For ALL, each input channel P.36
Default HDCP 2.2
INPUT TIMING
INPUT POSITION For Each input channel P.37
Default H: 0.00%, V: 0.00%
INPUT SIZE For Each input channel P.37
Default H: 100.00%, V: 100.00%
INPUT ASPECT For Each input channel P.38
Default AUTO
INPUT CONTRAST For Each input channel P.38
Default R: 100%, G: 100%, R: 100%
INPUT BRIGHTNESS For Each input channel P.39
Default 100%
INPUT BLANK COLOR For ALL, Each input channel P.39
Default R: 0, G: 0, B: 0
WINDOW SETTING
WINDOW POSITION For Each input channel P.40
Default H: 0.00%, V: 0.00%
WINDOW SIZE For Each input channel P.40
Default H: 100.00%, V: 100.00%
VIEW POSITION For Each input channel P.41
Default H: 0.00%, V: 0.00%
VIEW SIZE For Each input channel P.41
Default H: 100.00%, V: 100.00%
WINDOW BACKGROUND For ALL, Each input channel P.42
Default R: 0, G: 0, B: 0
WINDOW PRIORITY For
―
P.43
Default IN1>IN2>IN3>IN4
WINDOW SWAP For
―
P.44
Default IN1: 1, IN2: 2, IN3: 3, IN4: 4
CAPTION ENABLE For Each input channel P.44
Default OFF
CAPTION STRING For Each input channel P.45
Default INPUT1, INPUT2, INPUT3, INPUT4