HDC-UHD Series User Guide
58
9.4.5 Deep Color
You can set the color depth to be output from the source device.
Menu
F20 to F21: IN1 to IN2
WEB menu EDID SETTINGS
→
DEEP COLOR
Setting value
[Table 9.15] Deep Color
Setting
Front
WEB browser
24 bit/pixel (8 bit/component) [Default]
24
24-BIT COLOR
30 bit/pixel (10 bit/component)
30
30-BIT COLOR
36 bit/pixel (12 bit/component)
36
36-BIT COLOR
The setting will be applied only if
is set to one of “03” to “46”.
Note:
If you select “30 bit/pixel (10 bit/component)” or “36 bit/pixel (12 bit/component)”, compared to “24 bit/pixel
(8 bit/component)”, “30 bit/pixel (10 bit/component)” or “36 bit/pixel (12 bit/component)” is transmitted using
a higher clock frequency. The clock frequency may cause noise if a poor-quality or an excessively long
cable is connected. In such a case, the noise may be removed by setting the color to “24 bit/pixel
(8 bit/component)”.
For 4K@50/59.94/60 (YCbCr 4:4:4), “24 bit” is selected automatically.
9.4.6 LPCM audio
Menu
F22 to F23: IN1 to IN2
WEB menu EDID SETTINGS
→
AUDIO FORMAT
→
Linear PCM
Setting value
[Table 9.16] LPCM audio
Setting
Front
WEB browser
32 kHz
32
32 kHz
44.1 kHz
44
44.1 kHz
48 kHz [Default]
48
48 kHz
88.2 kHz
88
88.2 kHz
96 kHz
96
96 kHz
176.4 kHz
176
176.4 kHz
192 kHz
192
192 kHz
The setting will be applied only if “
” is set to one of “03” to “46”.
You can set the maximum sampling frequency of LPCM that is output from the source device.
Note:
LC monitors do not support some audio formats. Select an audio format and sampling frequency supported
by the device.
