IDK HDC-TH401, User Manual

Page: 51 / 65

HDC-TH401/201/101 User Guide
51
7.24 Setting HDCP input
This menu is available if “ 7.22 Setting maintenance ” is set to “ON”.
Some source devices negotiate with the connected device to determine if HDCP encryption is supported.
After this negotiation, the source device determines whether HDCP signal encryption is enforced or not. This
process takes place with some source device, even if the content being presented is not copyright protected.
The HDC is HDCP compliant, if it is connected to a display device that does not support HDCP, even
unprotected AV content may not be successfully displayed. Under these circumstances and if the content is
indeed not protected, the problem can be solved by disabling this menu.
HDCP
supported PC
Non-HDCP display
HDCP output
ON
No video image
Both HDCP / Non-HDCP displays
Only no HDCP contents
can be displayed
HDCP output
OFF
Cat6 cable
HDCP display
Video image
HDC-RH100-C
Receiver
HDC-TH401/201/101
Transmitter
HDCP setting
“
ON
”
HDC-TH401/201/101
Transmitter
HDCP setting
“
OFF
”
HDC-RH100-C
Receiver
Up to 197 ft.
(60m)
Cat6 cable
Up to 197 ft.
(60m)
Rx
R
S
-23
2C
L
A
N
Cat6 Rx for HDMI
POWER LINK HDCP
STATUS
POWER LINK HDCP POWER LINK HDCP
STATUS FG
D C
5V
2A HDC-RH100-C
IN
P UT
DON'T
CONNECT
LAN H
DB
as
e T
CAUTION
!
(MA
X
2
M)
H DM
I
O
UT
P UT
Rx
R
S
-23
2C
L AN
Cat6 Rx for HDMI
POWER LINK HDCP STATUS POWER LINK HDCP POWER LINK HDCP STATUS FG
D
C
5V
2A
HDC-RH100-C
IN
P
UT
DON'T
CONNECT LAN H
DB
as
e T
CAUTION
!
(MA
X 2
M)
H
DM
I
O
U T
P
U T
[Fig. 7.8] HDCP-supported and HDCP-non-supported display devices
・
Setting by menu
Normal condition (OFF)
↓ SET button
“
－
” “
＋
” button
set INPUTHDCP setting → select C06
↓ SET button
“
－
” “
＋
” button select RX HDCP setting [Default: ON]
OFF: HDCP not supported/ON: HDCP supported
↓ SET button
After processing, 7-SEGMENT LED goes back to menu.