HDC-TH401/201/101 User Guide
40
7.13 Setting DTS Audio
You can set the DTS Audio that is output from the source device.
This setting is applied if the source and sink devices are connected and “
” is set
to a number of “3” to “22 (Built-in EDID)”.
Notes:
・
Some LCD monitors do not support some audio formats. Select the audio format and sampling frequency
supported by your device.
・
Audio is not output from the analog output connector of the HDC.
・
Setting by menu
Normal condition (OFF)
↓ SET button
“
－
” “
＋
” button set INPUT DTS Audio
→ select F30
↓ SET button
“
－
” “
＋
” button set DTS Audio [Default: OFF]
OFF 32: 32 kHz 44: 44.1 kHz 48: 48 kHz 96: 96kHz
↓
During DTS Audio setting is processing, READY LED is OFF.
After setting is finished, the LED is ON.
↓
After processing, 7-SEGMENT LED goes back to menu.
