HDC-TH401/201/101 User Guide
31
7.5 Setting external EDID
You can set the HDMI output connector for when “External EDID” is selected
in “
Set this menu before setting the EDID resolution to “EXTERNAL (External EDID)”.
・
Setting by menu
Normal condition (OFF)
↓ SET button
“
－
” “
＋
” button
Setting INPUT external EDID → Select F12
↓ SET button
“
－
” “
＋
” button Select output connector [Default: 01: HDC OUTPUT]
HDMI OUTPUT
→ 01, OUTPUT1 → 02, OUTPUT2 → 03, OUTPUT3 → 04,
OUTPUT4
→ 05
*
HDC-TH201 cannot select 04 and 05.
*
HDC-TH101 cannot select 03, 04, and 05.
↓ SET button
During EDID copy is processing, READY LED is OFF. After copying is finished, the LED is ON.
If there is connection error, error on reading EDID, error on writing EDID, or checksum error
occurred, ERROR LED is ON. Please copy EDID again.
↓
After processing, 7-SEGMENT LED goes back to menu.
