HDC-TH200 User Guide/Command Guide
43
8.4.13 [ F38 ]
Copying EDID’s CEC physical address
CEC: Pass through between HDMI input connector and HDBaseT output connector.
The CEC physical address of the sink device that is connected to HDBaseT output connector can be copied
into the EDID of the HDC-TH200 HDMI input connector.
If the CEC physical address of the connected sink device and the HDC’s address are not the same, the CEC
functions, such as input switching in the sink device at start-up, may not work correctly. The problem can be
solved by using the CEC physical address that is copied into the HDC.
Setting value
on : Copying physical address
oFF : Not copy physical address [Default]
Notes:
・
The setting will be applied only if one of 03 to 22 is selected for
8.4.2 [ F10 to F11 ] EDID resolution
” and
CEC supported source and sink devices are connected.
・
CEC system link functions supported by other manufacturers’ are not guaranteed to work correctly by this
setting. Check the actual configuration.
