HDC-TH100WPJ User Guide
14
6 Precautions
6.1 Power supply
The HDC can be powered by either of:
・
From a device supporting PoH PSE (IEEE 802.3af)
or
・
From DC 12 V power supply
Note:
When using PoH, do not use the DC 12V power supply.
■
Powered from a device supporting PoH (PSE)
Power is provided from a device supporting PoH over a category cable that is connected to an HDBaseT
output connector. Turn all devices off when connecting to the category cable.
HDC-TH100WPJ
HDC-P1502
HDBaseT receiver that does
not support PoH
[Fig. 6.1] Powered from HDC-P1502
