HDC-UHD Series Command Guide
10
2.2.3 Setting up LAN communication
(1) Connect the HDC and the control device via a LAN cable.
(2) Set up LAN communication as follows:
・
Set IP address and subnet mask
・
TCP pot number: 23, 1100, 6000 to 6999
【
Reference: User guide
】
(3) Establish the connection from the control device to the IP address and TCP port that are set to the HDC in
step (2) above.
(4) Send a communication command from the control device to the HDC in order to check the control status of
the HDC.
Step (3)
Laptop
(Control device)
Step (2)
Step (1)
LAN cable
Step (4)
HDC-TR121UHD
Communication
command
[Fig. 2.6] Setting LAN communication
